Guys see if I have this right. I am not so good at electrical.
Unground stator......So disconnect 4th winding from the ground and run and new wire up the harness. This new wire will connect to Purple wire from R/R (reference above pic from Chuck, the R/R from HPI)
Yellow wire from stator to yellow wire on HPI R/R.
Red wire from R/R to battery.
Black from R/R to frame ground.
CDI orange to Coil.
CDI and Coil grounds to Frame.
CDI black/white...?
Orange and gray wiring harness (previously connected to coils) no longer used.
Red and white wire from harness....no longer used?
Thanks, just want to make sure I get this right.
Unground stator......So disconnect 4th winding from the ground and run and new wire up the harness. This new wire will connect to Purple wire from R/R (reference above pic from Chuck, the R/R from HPI)
Yellow wire from stator to yellow wire on HPI R/R.
Red wire from R/R to battery.
Black from R/R to frame ground.
CDI orange to Coil.
CDI and Coil grounds to Frame.
CDI black/white...?
Orange and gray wiring harness (previously connected to coils) no longer used.
Red and white wire from harness....no longer used?
Thanks, just want to make sure I get this right.