YDS7 & R5 carb slides?

[soonerbillz]

Are the YDS7 & R5 carb slides the same ?   
I know the part numbers show the be the same.. but is there differences between the two?
My bike is a R5 frame but it has the TDS7 lower motor. It had a set of cables with caps and slides but I have no idea what they had going on as the top end and carbs were MIA.

[SoCal250]

Same part between the models, although Left & Right are not the same. Double check that both sides have the same number stamped in them (should be inside the bottom) for the cutaway. Should be a 2.0 cutaway for DS7 & R5, as shown in the part numbers below

278-14112-20-00   Throttle valve, L
278-14113-20-00   Throttle valve, R


EDIT: I've attached a photo of a 2.0 slide showing the cutaway number

[soonerbillz]

Same part between the models, although Left & Right are not the same. Double check that both sides have the same number stamped in them (should be inside the top) for the cutaway. Should be a 2.0 cutaway for DS7 & R5, as shown in the part numbers below

278-14112-20-00   Throttle valve, L
278-14113-20-00   Throttle valve, R

Ok.. Thanks. I'll take a look at them tonight!