- Welcome to 2 STROKE WORLD .net.
2 STROKE WORLD
Recent posts
#1
Turning Wrenches / Re: Ebay Carb Boots
Last post by Milan - Today at 04:25:32 PMTake your originals & soak them in ArmorAll for a few days.
See if they soften.
I have also soaked them in brake fluid.
They soften up, then soak in ArmorAll after.
M
See if they soften.
I have also soaked them in brake fluid.
They soften up, then soak in ArmorAll after.
M
#2
General Chatter / Decals or Stickers
Last post by Milan - Today at 04:23:26 PMThere are a few sellers on Ebay selling the decal sets for RZ's, TZR's RD500, etc.
And some other sites as well.
Anyone have any experience with the quality of these.
They can be priced drastically different.
https://www.ebay.co.uk/itm/394490610351
https://rddecals.afegraphics.com/view_product.php?&product=84RD500EU-Black-FullKit-R01605
And some other sites as well.
Anyone have any experience with the quality of these.
They can be priced drastically different.
https://www.ebay.co.uk/itm/394490610351
https://rddecals.afegraphics.com/view_product.php?&product=84RD500EU-Black-FullKit-R01605
#3
Events / Re: VMCC Scottish Highlands Ra...
Last post by IR8D8R - Today at 03:06:52 PMI kinda like that MZ. Even though it looks like 1970's school AV equipment.
That front fender would protect you from land mines.
IR8D8R
That front fender would protect you from land mines.
IR8D8R
#4
Turning Wrenches / Re: Ebay Carb Boots
Last post by m in sc - Today at 03:02:57 PMyup. glad you caught it.
and, welcome to the board.
and, welcome to the board.
#5
Turning Wrenches / Ebay Carb Boots
Last post by Erik the Bike Man - Today at 02:48:37 PMJust got my '71 R5 back together after sitting blown up for almost 6 years. Failed a leakdown test with TONS of air dumping out the intake boots.
These are the cheapo boots off ebay.
Spent a couple extra bucks on the ones that EconomyCycle carries. The originals I have show zero signs of dry rot, but they are hard as a rock.
These are the cheapo boots off ebay.
Spent a couple extra bucks on the ones that EconomyCycle carries. The originals I have show zero signs of dry rot, but they are hard as a rock.
#6
Turning Wrenches / Re: Banshee Crank in RD350 Cas...
Last post by m in sc - Today at 02:07:32 PMreach out to vitos, they can probably do a drop-in crank 4mm stroked
#7
Turning Wrenches / Re: Banshee Crank in RD350 Cas...
Last post by Jung - Today at 02:04:12 PMAh, that is good news. Much appreciated!
4mm Banshee cranks have got soooo cheap, it's extremely tempting to try and mod to fit them. I'm finishing up another motor at the moment, but I think I'll have to investigate as my next project. I've got some tatty old cases to throw at the cause.
4mm Banshee cranks have got soooo cheap, it's extremely tempting to try and mod to fit them. I'm finishing up another motor at the moment, but I think I'll have to investigate as my next project. I've got some tatty old cases to throw at the cause.
#8
Turning Wrenches / Re: Left cylinder is happy now...
Last post by 85RZwade - Today at 01:56:06 PMAnd there was much rejoicing!
#9
Turning Wrenches / Re: Banshee Crank in RD350 Cas...
Last post by m in sc - Today at 01:45:58 PMcyl spacing IS the same center to center. you can get a stroker rd crank done though
#10
Turning Wrenches / Re: Banshee Crank in RD350 Cas...
Last post by Jung - Today at 01:25:50 PMThey're definitely a bit wider, I'm hoping to find out if the cylinder spacing is the same. Keeping my eyes peeled for a junker banshee crank that I can do some proper measuring with in the meantime.
Ta!
Ta!